RGB LED traffic light kit

Material and finishing: mirror-polished chrome plastic

Diameter: 120 mm

Available models:

• 24 V DC version for OverGate 4.0 (does not require other electronic control devices)
• 12 V DC version for bar-code column

(Only on gates where a BYAS or NO kit is present)

Transit counter software able to receive impulses from various passageways (if installed in the same sales outlet). Transit data organized according to parameters by periods or returns through excel or pdf files. Management of internal communication via IP address. Ask about it.

(Only on gates where a BYAS or NO kit is present)

Desktop unit equipped with digital 6-digit transit counter. If combined with BYAS or NO systems, able to supply an absolute transit count with a minimum margin of error (the error increases as the size of the passageway it is controlling increases). Battery powered.

This kit allows for remote opening control of an Overgate 4.0 BASE gate by means of radio buttons. It is composed of a receiver and two radio buttons.

Desktop remote control unit equipped with button and switch for opening an Overgate 4.0 gate - complete with 5m of cable.

Voice synthesizer able to repeat 4 different types of messages (or else the same message in 4 different languages) - modular design that can be connected at any time to the Overgate 4.0 gate - complete with fixing tube and wiring.

This kit permits the control of one or more Overgate 4.0 gates by means of a sensor fitted to the ceiling of your sales outlet. Useful as a complement within systems equipped with sensors for the customer detection or for the management of alarm areas rear to the passageway itself.

(only on gates where a motor column radar kit is present)

This kit, together with the Overgate 4.0 BASE gate, allows you to create an automatic gate controlled by 2 single passageway radar, with detection area coverage of about 180°.

RGB LED traffic light kit

Material and finishing: mirror-polished chrome metal

Diameter: 120 mm

Available models:

• 24 V DC version for OverGate 4.0 (does not require other electronic control devices)
• 12 V DC version for bar-code column

Why is using our system more profitable?

Above all, it doesn’t cost more than other systems but it is more complete.
It was created in collaboration with some of the most important POS companies in Italy. It works as stand-alone but does not require access to the company network for operation, but only provided it is possible to make remote updates, and it is pre-set for use with NCR, IBM and Nixdorf cash registers.

The automatic Overgate 4.0 gate has all of the features necessary to create a system that is comfortable for users and safe for managers.

Basically, you turn it on and start using it. Simple.

We know that you would like to punish customers that come out from the entrance with their pocketsfull, but you arrive too late to stop them!
Were you thinking of barbed wire?

Sure, ok, it’s a war - but an actual war is terrible and we are sure you would prefer to avoid it.

Try to complete your entrance with a BYAS system. You will be warned by an acoustic alarm whenever a customer tries to exit from the “wrong” side.

It may seem like a small thing, but in the meantime it stops customers “in good faith” and is an excellent deterrent for professional shoplifters.

If nothing else, it will force them to find another way to leave you with your pockets empty.

If you don’t like the idea of an acoustic alarm in your store, you can transfer the alarm where you see fit - obviously if there is a cable - or else you can use your voice synthesizer kit to give a message which gives a message to careless customers not to try “anything funny.”

RGB LED traffic light kit

Material and finishing: mirror-polished chrome plastic

Diameter: 120 mm

Available models:

• 24 V DC version for OverGate 4.0 (does not require other electronic control devices)
• 12 V DC version for bar-code column

(Only on gates where a BYAS or NO kit is present)

Transit counter software able to receive impulses from various passageways (if installed in the same sales outlet). Transit data organized according to parameters by periods or returns through excel or pdf files. Management of internal communication via IP address. Ask about it.

(Only on gates where a BYAS or NO kit is present)

Desktop unit equipped with digital 6-digit transit counter. If combined with BYAS or NO systems, able to supply an absolute transit count with a minimum margin of error (the error increases as the size of the passageway it is controlling increases). Battery powered.

This kit allows for remote opening control of an Overgate 4.0 BASE gate by means of radio buttons. It is composed of a receiver and two radio buttons.

Desktop remote control unit equipped with button and switch for opening an Overgate 4.0 gate - complete with 5m of cable.

Voice synthesizer able to repeat 4 different types of messages (or else the same message in 4 different languages) - modular design that can be connected at any time to the Overgate 4.0 gate - complete with fixing tube and wiring.

This kit permits the control of one or more Overgate 4.0 gates by means of a sensor fitted to the ceiling of your sales outlet. Useful as a complement within systems equipped with sensors for the customer detection or for the management of alarm areas rear to the passageway itself.

(only on gates where a motor column radar kit is present)

This kit, together with the Overgate 4.0 BASE gate, allows you to create an automatic gate controlled by 2 single passageway radar, with detection area coverage of about 180°.

RGB LED traffic light kit

Material and finishing: mirror-polished chrome metal

Diameter: 120 mm

Available models:

• 24 V DC version for OverGate 4.0 (does not require other electronic control devices)
• 12 V DC version for bar-code column

Why is using our system more profitable?

Above all, it doesn’t cost more than other systems but it is more complete.
It was created in collaboration with some of the most important POS companies in Italy. It works as stand-alone but does not require access to the company network for operation, but only provided it is possible to make remote updates, and it is pre-set for use with NCR, IBM and Nixdorf cash registers.

The automatic Overgate 4.0 gate has all of the features necessary to create a system that is comfortable for users and safe for managers.

Basically, you turn it on and start using it. Simple.

We know that you would like to punish customers that come out from the entrance with their pocketsfull, but you arrive too late to stop them!
Were you thinking of barbed wire?

Sure, ok, it’s a war - but an actual war is terrible and we are sure you would prefer to avoid it.

Try to complete your entrance with a BYAS system. You will be warned by an acoustic alarm whenever a customer tries to exit from the “wrong” side.

It may seem like a small thing, but in the meantime it stops customers “in good faith” and is an excellent deterrent for professional shoplifters.

If nothing else, it will force them to find another way to leave you with your pockets empty.

If you don’t like the idea of an acoustic alarm in your store, you can transfer the alarm where you see fit - obviously if there is a cable - or else you can use your voice synthesizer kit to give a message which gives a message to careless customers not to try “anything funny.”

RGB LED traffic light kit

Material and finishing: mirror-polished chrome plastic

Diameter: 120 mm

Available models:

• 24 V DC version for OverGate 4.0 (does not require other electronic control devices)
• 12 V DC version for bar-code column

(Only on gates where a BYAS or NO kit is present)

Transit counter software able to receive impulses from various passageways (if installed in the same sales outlet). Transit data organized according to parameters by periods or returns through excel or pdf files. Management of internal communication via IP address. Ask about it.

(Only on gates where a BYAS or NO kit is present)

Desktop unit equipped with digital 6-digit transit counter. If combined with BYAS or NO systems, able to supply an absolute transit count with a minimum margin of error (the error increases as the size of the passageway it is controlling increases). Battery powered.

This kit allows for remote opening control of an Overgate 4.0 BASE gate by means of radio buttons. It is composed of a receiver and two radio buttons.

Desktop remote control unit equipped with button and switch for opening an Overgate 4.0 gate - complete with 5m of cable.

Voice synthesizer able to repeat 4 different types of messages (or else the same message in 4 different languages) - modular design that can be connected at any time to the Overgate 4.0 gate - complete with fixing tube and wiring.

This kit permits the control of one or more Overgate 4.0 gates by means of a sensor fitted to the ceiling of your sales outlet. Useful as a complement within systems equipped with sensors for the customer detection or for the management of alarm areas rear to the passageway itself.

(only on gates where a motor column radar kit is present)

This kit, together with the Overgate 4.0 BASE gate, allows you to create an automatic gate controlled by 2 single passageway radar, with detection area coverage of about 180°.

RGB LED traffic light kit

Material and finishing: mirror-polished chrome metal

Diameter: 120 mm

Available models:

• 24 V DC version for OverGate 4.0 (does not require other electronic control devices)
• 12 V DC version for bar-code column

Why is using our system more profitable?

Above all, it doesn’t cost more than other systems but it is more complete.
It was created in collaboration with some of the most important POS companies in Italy. It works as stand-alone but does not require access to the company network for operation, but only provided it is possible to make remote updates, and it is pre-set for use with NCR, IBM and Nixdorf cash registers.

The automatic Overgate 4.0 gate has all of the features necessary to create a system that is comfortable for users and safe for managers.

Basically, you turn it on and start using it. Simple.

We know that you would like to punish customers that come out from the entrance with their pocketsfull, but you arrive too late to stop them!
Were you thinking of barbed wire?

Sure, ok, it’s a war - but an actual war is terrible and we are sure you would prefer to avoid it.

Try to complete your entrance with a BYAS system. You will be warned by an acoustic alarm whenever a customer tries to exit from the “wrong” side.

It may seem like a small thing, but in the meantime it stops customers “in good faith” and is an excellent deterrent for professional shoplifters.

If nothing else, it will force them to find another way to leave you with your pockets empty.

If you don’t like the idea of an acoustic alarm in your store, you can transfer the alarm where you see fit - obviously if there is a cable - or else you can use your voice synthesizer kit to give a message which gives a message to careless customers not to try “anything funny.”

RGB LED traffic light kit

Material and finishing: mirror-polished chrome plastic

Diameter: 120 mm

Available models:

• 24 V DC version for OverGate 4.0 (does not require other electronic control devices)
• 12 V DC version for bar-code column

(Only on gates where a BYAS or NO kit is present)

Transit counter software able to receive impulses from various passageways (if installed in the same sales outlet). Transit data organized according to parameters by periods or returns through excel or pdf files. Management of internal communication via IP address. Ask about it.

(Only on gates where a BYAS or NO kit is present)

Desktop unit equipped with digital 6-digit transit counter. If combined with BYAS or NO systems, able to supply an absolute transit count with a minimum margin of error (the error increases as the size of the passageway it is controlling increases). Battery powered.

This kit allows for remote opening control of an Overgate 4.0 BASE gate by means of radio buttons. It is composed of a receiver and two radio buttons.

Desktop remote control unit equipped with button and switch for opening an Overgate 4.0 gate - complete with 5m of cable.

Voice synthesizer able to repeat 4 different types of messages (or else the same message in 4 different languages) - modular design that can be connected at any time to the Overgate 4.0 gate - complete with fixing tube and wiring.

This kit permits the control of one or more Overgate 4.0 gates by means of a sensor fitted to the ceiling of your sales outlet. Useful as a complement within systems equipped with sensors for the customer detection or for the management of alarm areas rear to the passageway itself.

(only on gates where a motor column radar kit is present)

This kit, together with the Overgate 4.0 BASE gate, allows you to create an automatic gate controlled by 2 single passageway radar, with detection area coverage of about 180°.

RGB LED traffic light kit

Material and finishing: mirror-polished chrome metal

Diameter: 120 mm

Available models:

• 24 V DC version for OverGate 4.0 (does not require other electronic control devices)
• 12 V DC version for bar-code column

Why is using our system more profitable?

Above all, it doesn’t cost more than other systems but it is more complete.
It was created in collaboration with some of the most important POS companies in Italy. It works as stand-alone but does not require access to the company network for operation, but only provided it is possible to make remote updates, and it is pre-set for use with NCR, IBM and Nixdorf cash registers.

The automatic Overgate 4.0 gate has all of the features necessary to create a system that is comfortable for users and safe for managers.

Basically, you turn it on and start using it. Simple.

We know that you would like to punish customers that come out from the entrance with their pocketsfull, but you arrive too late to stop them!
Were you thinking of barbed wire?

Sure, ok, it’s a war - but an actual war is terrible and we are sure you would prefer to avoid it.

Try to complete your entrance with a BYAS system. You will be warned by an acoustic alarm whenever a customer tries to exit from the “wrong” side.

It may seem like a small thing, but in the meantime it stops customers “in good faith” and is an excellent deterrent for professional shoplifters.

If nothing else, it will force them to find another way to leave you with your pockets empty.

If you don’t like the idea of an acoustic alarm in your store, you can transfer the alarm where you see fit - obviously if there is a cable - or else you can use your voice synthesizer kit to give a message which gives a message to careless customers not to try “anything funny.”

Available dimensions:

• 800 x 600 mm (LxH)
• 900 x 600 mm (LxH)

Including: adhesive sign plate (→/x)

Material and Finishing: transparent polycarbonate

Tickness: 10 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Dimensions: 66,9 x 60 x 30 (LxHxP)

Including: screws

Material and Finishing: mirror-polished chrome plated steel

Compatible with: OverGate

Dimensions: 

• 500 x 1,340 mm (LxH)
• 600 x 1,340 mm (LxH)
• 700 x 1,340 mm (LxH)
• 800 x 1,340 mm (LxH)
• 900 x 1,340 mm (LxH)

Including: adhesive sign plate

Material and Finishing: polycarbonate

Tickness: 8 mm
Distance between fixing points: 720 mm

Compatible with: Panther checkout

Available lengths: 

• 600 mm
• 700 mm
• 800 mm
• 900 mm

Including: adhesive sign plate (→/x)

Material and Finishing: transparent polycarbonate

Tickness: 10 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 

• 600 mm
• 700 mm
• 900 mm

Including: 

• 24 V RGB LED lighting controlled by OverGate 4.0 motherboard

• Adhesive sign plate (→/x)

Material and Finishing: transparent acrylic

Tickness: 13 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available dimensions:

• 800 x 600 mm (LxH)
• 900 x 600 mm (LxH)

Including: adhesive sign plate (→/x)

Material and Finishing: transparent polycarbonate

Tickness: 10 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Dimensions: 66,9 x 60 x 30 (LxHxP)

Including: screws

Material and Finishing: mirror-polished chrome plated steel

Compatible with: OverGate

Dimensions: 

• 500 x 1,340 mm (LxH)
• 600 x 1,340 mm (LxH)
• 700 x 1,340 mm (LxH)
• 800 x 1,340 mm (LxH)
• 900 x 1,340 mm (LxH)

Including: adhesive sign plate

Material and Finishing: polycarbonate

Tickness: 8 mm
Distance between fixing points: 720 mm

Compatible with: Panther checkout

Available lengths: 

• 600 mm
• 700 mm
• 800 mm
• 900 mm

Including: adhesive sign plate (→/x)

Material and Finishing: transparent polycarbonate

Tickness: 10 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 

• 600 mm
• 700 mm
• 900 mm

Including: 

• 24 V RGB LED lighting controlled by OverGate 4.0 motherboard

• Adhesive sign plate (→/x)

Material and Finishing: transparent acrylic

Tickness: 13 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available dimensions:

• 800 x 600 mm (LxH)
• 900 x 600 mm (LxH)

Including: adhesive sign plate (→/x)

Material and Finishing: transparent polycarbonate

Tickness: 10 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Dimensions: 66,9 x 60 x 30 (LxHxP)

Including: screws

Material and Finishing: mirror-polished chrome plated steel

Compatible with: OverGate

Dimensions: 

• 500 x 1,340 mm (LxH)
• 600 x 1,340 mm (LxH)
• 700 x 1,340 mm (LxH)
• 800 x 1,340 mm (LxH)
• 900 x 1,340 mm (LxH)

Including: adhesive sign plate

Material and Finishing: polycarbonate

Tickness: 8 mm
Distance between fixing points: 720 mm

Compatible with: Panther checkout

Available lengths: 

• 600 mm
• 700 mm
• 800 mm
• 900 mm

Including: adhesive sign plate (→/x)

Material and Finishing: transparent polycarbonate

Tickness: 10 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 

• 600 mm
• 700 mm
• 900 mm

Including: 

• 24 V RGB LED lighting controlled by OverGate 4.0 motherboard

• Adhesive sign plate (→/x)

Material and Finishing: transparent acrylic

Tickness: 13 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available dimensions:

• 800 x 600 mm (LxH)
• 900 x 600 mm (LxH)

Including: adhesive sign plate (→/x)

Material and Finishing: transparent polycarbonate

Tickness: 10 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Dimensions: 66,9 x 60 x 30 (LxHxP)

Including: screws

Material and Finishing: mirror-polished chrome plated steel

Compatible with: OverGate

Dimensions: 

• 500 x 1,340 mm (LxH)
• 600 x 1,340 mm (LxH)
• 700 x 1,340 mm (LxH)
• 800 x 1,340 mm (LxH)
• 900 x 1,340 mm (LxH)

Including: adhesive sign plate

Material and Finishing: polycarbonate

Tickness: 8 mm
Distance between fixing points: 720 mm

Compatible with: Panther checkout

Available lengths: 

• 600 mm
• 700 mm
• 800 mm
• 900 mm

Including: adhesive sign plate (→/x)

Material and Finishing: transparent polycarbonate

Tickness: 10 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 

• 600 mm
• 700 mm
• 900 mm

Including: 

• 24 V RGB LED lighting controlled by OverGate 4.0 motherboard

• Adhesive sign plate (→/x)

Material and Finishing: transparent acrylic

Tickness: 13 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: 

• without sleeves;
• For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 3 sleeves
• 6 sleeves: 180°
• 6 sleeves: 90°
• 9 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 2 sleeves
• 4 sleeves: 180°
• 4 sleeves: 90°
• 6 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Bars, even if they remind us of more dangerous places, are an essential part of our sales outlet entrance and exit management system.

Available lengths:

• 500 mm
• 1,000 mm
• 1,500 mm
• 2,000 mm
• 2,500 mm

Material and Finishing:  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 40 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 1 sleeve
• 2 sleeves: 180°
• 2 sleeves: 90°
• 3 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: 

• without sleeves;
• For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 3 sleeves
• 6 sleeves: 180°
• 6 sleeves: 90°
• 9 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 2 sleeves
• 4 sleeves: 180°
• 4 sleeves: 90°
• 6 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Bars, even if they remind us of more dangerous places, are an essential part of our sales outlet entrance and exit management system.

Available lengths:

• 500 mm
• 1,000 mm
• 1,500 mm
• 2,000 mm
• 2,500 mm

Material and Finishing:  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 40 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 1 sleeve
• 2 sleeves: 180°
• 2 sleeves: 90°
• 3 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: 

• without sleeves;
• For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 3 sleeves
• 6 sleeves: 180°
• 6 sleeves: 90°
• 9 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 2 sleeves
• 4 sleeves: 180°
• 4 sleeves: 90°
• 6 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Bars, even if they remind us of more dangerous places, are an essential part of our sales outlet entrance and exit management system.

Available lengths:

• 500 mm
• 1,000 mm
• 1,500 mm
• 2,000 mm
• 2,500 mm

Material and Finishing:  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 40 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 1 sleeve
• 2 sleeves: 180°
• 2 sleeves: 90°
• 3 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: 

• without sleeves;
• For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 3 sleeves
• 6 sleeves: 180°
• 6 sleeves: 90°
• 9 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 2 sleeves
• 4 sleeves: 180°
• 4 sleeves: 90°
• 6 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Bars, even if they remind us of more dangerous places, are an essential part of our sales outlet entrance and exit management system.

Available lengths:

• 500 mm
• 1,000 mm
• 1,500 mm
• 2,000 mm
• 2,500 mm

Material and Finishing:  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 40 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Uprights are the framework of the vertical sales outlet entrance and exit management system.

Sleeves configuration:

• 1 sleeve
• 2 sleeves: 180°
• 2 sleeves: 90°
• 3 sleeves: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet. 

Lenght:

• 4.5 m
• 9 m

Available models:

• Rectangular base plate covers for uprights with diameter of:
  • 40 mm
  • 60 mm
  • 80 mm
• Round base plate covers for columns with diameter of:
  • 120 mm

Material and Finishing: chrome plated and mirror polished plastic

Lenght:

• 4.5 m
• 9 m

Available models:

• Rectangular base plate covers for uprights with diameter of:
  • 40 mm
  • 60 mm
  • 80 mm
• Round base plate covers for columns with diameter of:
  • 120 mm

Material and Finishing: chrome plated and mirror polished plastic

Lenght:

• 4.5 m
• 9 m

Available models:

• Rectangular base plate covers for uprights with diameter of:
  • 40 mm
  • 60 mm
  • 80 mm
• Round base plate covers for columns with diameter of:
  • 120 mm

Material and Finishing: chrome plated and mirror polished plastic

Lenght:

• 4.5 m
• 9 m

Available models:

• Rectangular base plate covers for uprights with diameter of:
  • 40 mm
  • 60 mm
  • 80 mm
• Round base plate covers for columns with diameter of:
  • 120 mm

Material and Finishing: chrome plated and mirror polished plastic

Length range: from 700 mm up to 1,100 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Available dimensions: 

• 800 x 1,880 mm (LxH)
• 900 x 1,880 mm (LxH)
• 1.000 x 1,880 mm (LxH)
• 1.100 x 1,880 mm (LxH)

complete with polycarbonate panel.

Material and Finishing: RAL 7035 painted steel

Tubular arm diameter: 28 mm

Distance between fixing points: 250 mm

Compatible with: Emergency Exit (must foreseen a passage width bigger than 1,200 mm)

Length range: from 700 mm up to 1,100 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate
• Mechanical gate
• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Available lengths: 

• 700 mm
• 900 mm
• 1,150 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate
• B-Easy (except arm lenght of 1,150 mm)
• Mechanical gate
• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Length range: from 700 mm up to 1,100 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Available dimensions: 

• 800 x 1,880 mm (LxH)
• 900 x 1,880 mm (LxH)
• 1.000 x 1,880 mm (LxH)
• 1.100 x 1,880 mm (LxH)

complete with polycarbonate panel.

Material and Finishing: RAL 7035 painted steel

Tubular arm diameter: 28 mm

Distance between fixing points: 250 mm

Compatible with: Emergency Exit (must foreseen a passage width bigger than 1,200 mm)

Length range: from 700 mm up to 1,100 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate
• Mechanical gate
• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Available lengths: 

• 700 mm
• 900 mm
• 1,150 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate
• B-Easy (except arm lenght of 1,150 mm)
• Mechanical gate
• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Length range: from 700 mm up to 1,100 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Available dimensions: 

• 800 x 1,880 mm (LxH)
• 900 x 1,880 mm (LxH)
• 1.000 x 1,880 mm (LxH)
• 1.100 x 1,880 mm (LxH)

complete with polycarbonate panel.

Material and Finishing: RAL 7035 painted steel

Tubular arm diameter: 28 mm

Distance between fixing points: 250 mm

Compatible with: Emergency Exit (must foreseen a passage width bigger than 1,200 mm)

Length range: from 700 mm up to 1,100 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate
• Mechanical gate
• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Available lengths: 

• 700 mm
• 900 mm
• 1,150 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate
• B-Easy (except arm lenght of 1,150 mm)
• Mechanical gate
• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Length range: from 700 mm up to 1,100 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Available dimensions: 

• 800 x 1,880 mm (LxH)
• 900 x 1,880 mm (LxH)
• 1.000 x 1,880 mm (LxH)
• 1.100 x 1,880 mm (LxH)

complete with polycarbonate panel.

Material and Finishing: RAL 7035 painted steel

Tubular arm diameter: 28 mm

Distance between fixing points: 250 mm

Compatible with: Emergency Exit (must foreseen a passage width bigger than 1,200 mm)

Length range: from 700 mm up to 1,100 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate
• Mechanical gate
• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Available lengths: 

• 700 mm
• 900 mm
• 1,150 mm

Material and Finishing: chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate
• B-Easy (except arm lenght of 1,150 mm)
• Mechanical gate
• Emergency Exit (must foreseen a passage width bigger than 1,200 mm)
• Checkout

Available lengths: 950 mm

Material and Finishing: polished aluminium

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 1,200 mm

Material and Finishing: polished aluminium

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 950 mm

Material and Finishing: polished aluminium

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 1,200 mm

Material and Finishing: polished aluminium

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 950 mm

Material and Finishing: polished aluminium

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 1,200 mm

Material and Finishing: polished aluminium

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 950 mm

Material and Finishing: polished aluminium

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Available lengths: 1,200 mm

Material and Finishing: polished aluminium

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with: OverGate

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: white plastic 

Height: 25 mm

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: transparent acrylic

Tichness: 3 mm

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: alveolar polycarbonate

Tichness: 4 mm

Height: 1,080 mm

Available lengths: 

• 650 mm
• 850 mm
• 1,050 mm

Material and Finishing: chrome plated or painted aluminium ^(1)
(1) Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate ^{(2)
  (2)} Please specify the opening direction

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: white plastic 

Height: 25 mm

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: transparent acrylic

Tichness: 3 mm

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: alveolar polycarbonate

Tichness: 4 mm

Height: 1,080 mm

Available lengths: 

• 650 mm
• 850 mm
• 1,050 mm

Material and Finishing: chrome plated or painted aluminium ^(1)
(1) Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate ^{(2)
  (2)} Please specify the opening direction

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: white plastic 

Height: 25 mm

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: transparent acrylic

Tichness: 3 mm

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: alveolar polycarbonate

Tichness: 4 mm

Height: 1,080 mm

Available lengths: 

• 650 mm
• 850 mm
• 1,050 mm

Material and Finishing: chrome plated or painted aluminium ^(1)
(1) Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate ^{(2)
  (2)} Please specify the opening direction

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: white plastic 

Height: 25 mm

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: transparent acrylic

Tichness: 3 mm

Compatible with aluminium frame having lenghts of:

• 650 mm
• 850 mm
• 1,050 mm

including all brackets and fixings.

Material and Finishing: alveolar polycarbonate

Tichness: 4 mm

Height: 1,080 mm

Available lengths: 

• 650 mm
• 850 mm
• 1,050 mm

Material and Finishing: chrome plated or painted aluminium ^(1)
(1) Please specify the RAL colour number.

Tubular arm diameter: 28 mm
Distance between fixing points: 250 mm

Compatible with:

• OverGate ^{(2)
  (2)} Please specify the opening direction

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 320 x 216 mm (LxH)

Including: clamping profiles

Material and Finishing:  white polycarbonate with double-sided printing

Tickness: 5 mm

Compatible with: Tubular arm

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Dimensions: 124 x 124 mm (LxH)

Material and Finishing:  PVC

Tickness: 1 mm

Compatible with: plastic arms

Aluminium profile and PVM

Available lenghts:

• 1,000 mm
• 2,000 mm
• 3,000 mm

Diameter: 40 mm

To be complete with:

• corner connector;
• height-adjustable foot (galvanized steel);
• end cap;
• fixing materials.

Aluminium profile and PVM

Available lenghts:

• 1,000 mm
• 2,000 mm
• 3,000 mm

Diameter: 40 mm

To be complete with:

• corner connector;
• height-adjustable foot (galvanized steel);
• end cap;
• fixing materials.

Aluminium profile and PVM

Available lenghts:

• 1,000 mm
• 2,000 mm
• 3,000 mm

Diameter: 40 mm

To be complete with:

• corner connector;
• height-adjustable foot (galvanized steel);
• end cap;
• fixing materials.

Aluminium profile and PVM

Available lenghts:

• 1,000 mm
• 2,000 mm
• 3,000 mm

Diameter: 40 mm

To be complete with:

• corner connector;
• height-adjustable foot (galvanized steel);
• end cap;
• fixing materials.

Shopping cart passages fitted with trolley flaps allows entry to the store in one direction only and helps to reduce attempts at sholifting.

Available models:

• 1,000 mm (4 flaps);
• 1,200 mm (4 flaps);
• 1,500 mm (6 flaps); 
• 2,000 mm (8 flaps).

Material and Finishing (bar): chrome plated and mirror polished 
Material and Finishing (flap): black or RAL 7035 plastic

Shopping cart passages fitted with trolley flaps allows entry to the store in one direction only and helps to reduce attempts at sholifting.

Available models:

• 1,000 mm (4 flaps);
• 1,200 mm (4 flaps);
• 1,500 mm (6 flaps); 
• 2,000 mm (8 flaps).

Material and Finishing (bar): chrome plated and mirror polished 
Material and Finishing (flap): black or RAL 7035 plastic

Shopping cart passages fitted with trolley flaps allows entry to the store in one direction only and helps to reduce attempts at sholifting.

Available models:

• 1,000 mm (4 flaps);
• 1,200 mm (4 flaps);
• 1,500 mm (6 flaps); 
• 2,000 mm (8 flaps).

Material and Finishing (bar): chrome plated and mirror polished 
Material and Finishing (flap): black or RAL 7035 plastic

Shopping cart passages fitted with trolley flaps allows entry to the store in one direction only and helps to reduce attempts at sholifting.

Available models:

• 1,000 mm (4 flaps);
• 1,200 mm (4 flaps);
• 1,500 mm (6 flaps); 
• 2,000 mm (8 flaps).

Material and Finishing (bar): chrome plated and mirror polished 
Material and Finishing (flap): black or RAL 7035 plastic

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Height:

• 2,000 mm
• 3,000 mm

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: 

• without clamps;
• For the layout configuration instructions, please download the technical data sheet.

Available dimensions:

• 950 x 950 mm (LxH)
• 950 x 1,500 mm (LxH)
• 950 x 1,900 mm (LxH)
• cut into lengths

Material and Finishing: chrome plated wire grates have a mesh size of 50 x 50 mm

Tichness: 6 mm

Available dimensions:

• 950 x 400 mm (LxH)
• 950 x 950 mm (LxH)
• 950 x 1,500 mm (LxH)
• 950 x 1,900 mm (LxH)
• cut into lengths

Material and Finishing: transparent acrylic

Tichness: 6 mm

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Sleeve configuration:

• 3 fixing clamps
• 6 fixing clamps: 180°
• 6 fixing clamps: 90°
• 9 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Clamps configuration:

• 2 fixing clamps
• 4 fixing clamps: 180°
• 4 fixing clamps: 90°
• 6 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Available models:

• chrome plated clamps for uprights

• chrome plated clamps panel connection

Material and Finishing:  chrome plated steel

Compatible with: Ø48 uprights

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Sleeve configuration:

• 4 fixing clamps
• 8 fixing clamps: 180°
• 8 fixing clamps: 90°
• 12 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Height:

• 2,000 mm
• 3,000 mm

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: 

• without clamps;
• For the layout configuration instructions, please download the technical data sheet.

Available dimensions:

• 950 x 950 mm (LxH)
• 950 x 1,500 mm (LxH)
• 950 x 1,900 mm (LxH)
• cut into lengths

Material and Finishing: chrome plated wire grates have a mesh size of 50 x 50 mm

Tichness: 6 mm

Available dimensions:

• 950 x 400 mm (LxH)
• 950 x 950 mm (LxH)
• 950 x 1,500 mm (LxH)
• 950 x 1,900 mm (LxH)
• cut into lengths

Material and Finishing: transparent acrylic

Tichness: 6 mm

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Sleeve configuration:

• 3 fixing clamps
• 6 fixing clamps: 180°
• 6 fixing clamps: 90°
• 9 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Clamps configuration:

• 2 fixing clamps
• 4 fixing clamps: 180°
• 4 fixing clamps: 90°
• 6 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Available models:

• chrome plated clamps for uprights

• chrome plated clamps panel connection

Material and Finishing:  chrome plated steel

Compatible with: Ø48 uprights

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Sleeve configuration:

• 4 fixing clamps
• 8 fixing clamps: 180°
• 8 fixing clamps: 90°
• 12 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Height:

• 2,000 mm
• 3,000 mm

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: 

• without clamps;
• For the layout configuration instructions, please download the technical data sheet.

Available dimensions:

• 950 x 950 mm (LxH)
• 950 x 1,500 mm (LxH)
• 950 x 1,900 mm (LxH)
• cut into lengths

Material and Finishing: chrome plated wire grates have a mesh size of 50 x 50 mm

Tichness: 6 mm

Available dimensions:

• 950 x 400 mm (LxH)
• 950 x 950 mm (LxH)
• 950 x 1,500 mm (LxH)
• 950 x 1,900 mm (LxH)
• cut into lengths

Material and Finishing: transparent acrylic

Tichness: 6 mm

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Sleeve configuration:

• 3 fixing clamps
• 6 fixing clamps: 180°
• 6 fixing clamps: 90°
• 9 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Clamps configuration:

• 2 fixing clamps
• 4 fixing clamps: 180°
• 4 fixing clamps: 90°
• 6 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Available models:

• chrome plated clamps for uprights

• chrome plated clamps panel connection

Material and Finishing:  chrome plated steel

Compatible with: Ø48 uprights

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Sleeve configuration:

• 4 fixing clamps
• 8 fixing clamps: 180°
• 8 fixing clamps: 90°
• 12 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Height:

• 2,000 mm
• 3,000 mm

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: 

• without clamps;
• For the layout configuration instructions, please download the technical data sheet.

Available dimensions:

• 950 x 950 mm (LxH)
• 950 x 1,500 mm (LxH)
• 950 x 1,900 mm (LxH)
• cut into lengths

Material and Finishing: chrome plated wire grates have a mesh size of 50 x 50 mm

Tichness: 6 mm

Available dimensions:

• 950 x 400 mm (LxH)
• 950 x 950 mm (LxH)
• 950 x 1,500 mm (LxH)
• 950 x 1,900 mm (LxH)
• cut into lengths

Material and Finishing: transparent acrylic

Tichness: 6 mm

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Sleeve configuration:

• 3 fixing clamps
• 6 fixing clamps: 180°
• 6 fixing clamps: 90°
• 9 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Clamps configuration:

• 2 fixing clamps
• 4 fixing clamps: 180°
• 4 fixing clamps: 90°
• 6 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Available models:

• chrome plated clamps for uprights

• chrome plated clamps panel connection

Material and Finishing:  chrome plated steel

Compatible with: Ø48 uprights

Used especially in discount stores, this economical alternative to barriers as tubes have become necessary, with the increase in shoplifting attempts, in all areas of store outlets that are far away from areas normally manned by the presence of cashiers or information booths. They are also valid when used to make visible and protect those areas typically used for promotion and offerings in large hypermarkets.

Sleeve configuration:

• 4 fixing clamps
• 8 fixing clamps: 180°
• 8 fixing clamps: 90°
• 12 fixing clamps: "T"

Material and Finishing (upright):  chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Material and Finishing (sleeve): plastic with finishing black, RAL 7035, chrome plated or painted steel ^(1)
(1) : Please specify the RAL colour number.

Diameter: 48 mm
Tickness: 1,5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Available dimensions:

• 480 x 865 mm (LxH)
• 980 x 865 mm (LxH)

Material and Finishing: reinforced glass

Tichness: 3+3R mm

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

The reinforced glass elements close fully with no gaps, effectively making shoplifting more difficult.

Inserts configuration:  please refer to the figure on the side.

Material and Finishing (upright):  INOX AISI 304

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Available dimensions:

• 480 x 865 mm (LxH)
• 980 x 865 mm (LxH)

Material and Finishing: reinforced glass

Tichness: 3+3R mm

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

The reinforced glass elements close fully with no gaps, effectively making shoplifting more difficult.

Inserts configuration:  please refer to the figure on the side.

Material and Finishing (upright):  INOX AISI 304

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Available dimensions:

• 480 x 865 mm (LxH)
• 980 x 865 mm (LxH)

Material and Finishing: reinforced glass

Tichness: 3+3R mm

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

The reinforced glass elements close fully with no gaps, effectively making shoplifting more difficult.

Inserts configuration:  please refer to the figure on the side.

Material and Finishing (upright):  INOX AISI 304

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

Available dimensions:

• 480 x 865 mm (LxH)
• 980 x 865 mm (LxH)

Material and Finishing: reinforced glass

Tichness: 3+3R mm

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

Available lenghts:

• 505 mm (distance between centres of uprights = 535 mm)
• 1,005 mm (distance between centres of uprights = 1,035 mm)

Material and Finishing: inox AISI 304

The reinforced glass elements close fully with no gaps, effectively making shoplifting more difficult.

Inserts configuration:  please refer to the figure on the side.

Material and Finishing (upright):  INOX AISI 304

Diameter: 48 mm
Tickness: 1.5 mm

Note: For the layout configuration instructions, please download the technical data sheet.

The kit contains:

• 4 stainless steel linear joints
• 4 stainless steel "L" joints
• 2 stainless steel flat "L" joints
• 22 stainless steel TBEI M6x16 screws

The kit contains:

• 6 stainless steel linear joints
• 2 stainless steel "L" joints
• 16 stainless steel TBEI M6x16 screws

The kit contains:

• 4 stainless steel linear joints
• 8 stainless steel TBEI M6x16 screws

Dimensions: 146 x 145.5 x 32 mm (LxHxP)

Material and Finishing: inox AISI 304

Note: including fixing material

Dimensions:

• 535 x 150 x 150 mm (LxHxP)
• 1,035 x 150 x 150 mm (LxHxP)

Material and Finishing:  inox AISI 304

Note: end element not included

Dimensions: 150 x 150 x 150 mm (LxHxP)

Material and Finishing: inox AISI 304

Note: including end element

The kit contains:

• 4 stainless steel linear joints
• 4 stainless steel "L" joints
• 2 stainless steel flat "L" joints
• 22 stainless steel TBEI M6x16 screws

The kit contains:

• 6 stainless steel linear joints
• 2 stainless steel "L" joints
• 16 stainless steel TBEI M6x16 screws

The kit contains:

• 4 stainless steel linear joints
• 8 stainless steel TBEI M6x16 screws

Dimensions: 146 x 145.5 x 32 mm (LxHxP)

Material and Finishing: inox AISI 304

Note: including fixing material

Dimensions:

• 535 x 150 x 150 mm (LxHxP)
• 1,035 x 150 x 150 mm (LxHxP)

Material and Finishing:  inox AISI 304

Note: end element not included

Dimensions: 150 x 150 x 150 mm (LxHxP)

Material and Finishing: inox AISI 304

Note: including end element

The kit contains:

• 4 stainless steel linear joints
• 4 stainless steel "L" joints
• 2 stainless steel flat "L" joints
• 22 stainless steel TBEI M6x16 screws

The kit contains:

• 6 stainless steel linear joints
• 2 stainless steel "L" joints
• 16 stainless steel TBEI M6x16 screws

The kit contains:

• 4 stainless steel linear joints
• 8 stainless steel TBEI M6x16 screws

Dimensions: 146 x 145.5 x 32 mm (LxHxP)

Material and Finishing: inox AISI 304

Note: including fixing material

Dimensions:

• 535 x 150 x 150 mm (LxHxP)
• 1,035 x 150 x 150 mm (LxHxP)

Material and Finishing:  inox AISI 304

Note: end element not included

Dimensions: 150 x 150 x 150 mm (LxHxP)

Material and Finishing: inox AISI 304

Note: including end element

The kit contains:

• 4 stainless steel linear joints
• 4 stainless steel "L" joints
• 2 stainless steel flat "L" joints
• 22 stainless steel TBEI M6x16 screws

The kit contains:

• 6 stainless steel linear joints
• 2 stainless steel "L" joints
• 16 stainless steel TBEI M6x16 screws

The kit contains:

• 4 stainless steel linear joints
• 8 stainless steel TBEI M6x16 screws

Dimensions: 146 x 145.5 x 32 mm (LxHxP)

Material and Finishing: inox AISI 304

Note: including fixing material

Dimensions:

• 535 x 150 x 150 mm (LxHxP)
• 1,035 x 150 x 150 mm (LxHxP)

Material and Finishing:  inox AISI 304

Note: end element not included

Dimensions: 150 x 150 x 150 mm (LxHxP)

Material and Finishing: inox AISI 304

Note: including end element

Dimensions:

• for upright with Ø 48 mm
• for upright with Ø 60 mm

Material and Finishing: chrome-plated plastic

Dimensions:

• for upright with Ø 48 mm
• for upright with Ø 60 mm

Material and Finishing: chrome-plated plastic

Dimensions:

• for upright with Ø 48 mm
• for upright with Ø 60 mm

Material and Finishing: chrome-plated plastic

Dimensions:

• for upright with Ø 48 mm
• for upright with Ø 60 mm

Material and Finishing: chrome-plated plastic